Type-2 connector replacement
Swap damaged or worn vehicle-side Type-2 inlet.
Type-2 connector replacement is a electrical & wiring service from ev.care, priced at a fixed ₹2,499 and booked for a 1 hour bench slot. Swap damaged or worn vehicle-side Type-2 inlet. We treat this as a workshop job, not a glove-box check — instruments come out, measurements are recorded, and the next technician picking up your vehicle has the data to build on. If we surface something outside the scope of this service we pause, quote it separately, and let you decide — no surprises on the invoice.
What's included
- OEM-spec Type-2 inlet
- Wiring harness check
- Earthing continuity test
- Charge handshake commissioning
Why this matters
Why owners book this: skipping it risks a 12V system failure that disables the EV's main contactor. A ₹2,499 workshop slot today is the cheapest insurance you can buy against that outcome.
How it works
- 1
Power is isolated and the relevant fuses / contactors are verified open.
- 2
Insulation resistance and continuity are measured before any rework.
- 3
Faulty conductors or connectors are replaced to OEM spec.
- 4
System is energised in a controlled sequence and re-tested.
- 5
A printed log records every measurement for your records.
What we typically find
From hundreds of inspections — what makes the report.
- 12V battery resting voltage borderline — replace within 2-3 months
- One ground point with elevated resistance — cleaned and re-torqued
- DC-DC converter output slightly low under load — within tolerance
- Charge-port pin showing minor oxidation
How to prepare
- Charge to a comfortable level — at least 30%
- Be ready to leave the vehicle if a part needs to be ordered
- Bring all key fobs to test pairing
Equipment we use
- Bench multimeter (true RMS, CAT-III rated)
- Insulation tester rated for the vehicle's HV pack
- Calibrated crimp tools for OEM connector families
- EV-grade insulating gloves and tools
Certifications
- IMI Level 3 EV electrical
- ARAI workshop registration
Transparent pricing breakdown
No hidden charges. This is exactly what makes up your bill.
Labour & instrumentation 1 hour | ₹1,749 |
Consumables & documentation | ₹750 |
| Total | ₹2,499 |
What customers say
“Clear communication on every step. Loose ground point, properly fixed.”
“Intermittent fault that two other workshops missed — they found it in the first hour. Solid diagnostic work.”
FAQs
How long?+
1 hour.
Parts cost?+
Included in the price for OEM-equivalent. OEM-original upgrade billed at cost.
Voids warranty?+
Check with OEM first.
Who needs this
Visibly damaged or burnt inlets, post-collision.
What's NOT included (honestly)
- Charging cable replacement
Related services
Ready to book type-2 connector replacement?
Fixed price ₹2,499 — no surprises. Or describe a different problem and we'll match the right service.